Econoline disc brake conversion kits

HomeBrake ProductsInstallation Instructions - Parts List - Shipping Information
Contact UsLinks

NEW PARTS ARE COMING SOON!!!! PLEASE CHECK BACK IN A FEW WEEKS.

Our Brake brackets were designed to fit STOCK 1961-1967 Econoline straight axles.
They may or may not fit over aftermarket axles using econoline spindles,
please make sure you have 1961-1967 econoline spindles before ordering our kit.
Some modifications maybe needed to fit with aftermarket axles and/or steering parts.
I am sorry but there will be no returns due to not fitting aftermarket or "other" brand axles.
Kits that include shipping are to the continental united states only.
please see the shipping information page for rates to canada.

Basic Disc Brake Conversion Kit - Part# BDK001       $225.00 includes shipping

Includes: D&D custom mounting brackets, new Grade 8 mounting bolts, Sway Bar Adapters and New Grade 8 Mounting Nuts and Bolts. List of parts needed to finish installation and instructions. Click for additional parts list

Master Disc Brake Conversion Kit - Part# BDK002       $495.00 includes shipping

Includes: D&D custom mounting brackets, new Grade 8 mounting bolts, 2 brake hoses, 2 Rotors, 2 brake calipers, one set of brake pads, 10 wheel studs, 2 banjo bolts, 2 line to hose adapters, 2 sway bar adapters, list of parts needed to finish instalation and instructions.

Basic Master Cylinder Conversion Kit - Part# BMK003       $199.00 includes shipping

Includes: D&D custom master cylinder mounting bracket, 2 aluminum adapters for remote reservoir hoses, master to bracket nuts and bolts, list of parts needed to finish installation and instructions.
Click for additional parts list

Loaded Master Cylinder Conversion Kit - Part# BMK004       $291.00 includes shipping

Includes: D&D custom master cylinder mounting bracket, Master cylinder for your specific application, 2 aluminum adapters for remote reservoir hoses, master cylinder application specific lines and adapters , brake light switch and mounting bracket, list of parts needed to finish installation and instructions.

 

Brake Type

Master Cylinder Remote Reservoir Kit - Part# RK010       $89.00 includes shipping

universal brake fluid reservoir kit

Includes: 1 plastic reservoir with internal divider and dual outlets, 2 pieces
of oil resistant hose each 2' long, 4 hose clamps and 2 brass fittings that fit
the D&Daluminum master cylinder plugs.
Customer will need to figure out reservoir mount depending on location.

Loaded Master Cylinder Kit with Reservoir Kit - Part# BMK005       $361.00 includes shipping

universal brake fluid reservoir kit

Includes: All of  BMK004 and All of RK010:
D&D custom master cylinder mounting bracket, Master cylinder for your
specific application, 2 aluminum adapters for remote reservoir hoses, master cylinder application specific lines and adapters , brake light switch and
mounting bracket and instructions.
 1 plastic reservoir with internal divider and dual outlets, 2 pieces of oil
resistant hose each 2' long, 4 hose clamps and 2 brass fittings.
Customer will need to figure out reservoir mount depending on location.

Brake Type

Master Cylinder Conversion with Master Disc Kit Part # BDK003      $781.00 includes shipping

Includes: All of BDK002 and All of BMK004 as shown above and list of parts needed to finish installation and instructions.

Brake Type

Master Disc kit,Loaded Master Cylinder Kit,Reservoir Kit Part # BDK004 $851.00includes shipping

This is the most complete kit we have It Includes Everything from Kits BDK002, BMK004 and RK010.
Includes: D&D custom mounting brackets, new Grade 8 mounting bolts, 2 brake hoses, 2 brake calipers, one set of
brake pads, 2 Rotors, 10 wheel studs, 2 banjo bolts, 2 line to hose adapters, 2 sway bar adapters, D&D custom
master cylinder mounting bracket, Master cylinder for your specific application, 2 aluminum adapters
for remote reservoirhoses, master cylinder application specific lines and adapters , brake light switch and
mounting bracket,1 plastic reservoir with internal divider and dual outlets, 2 pieces of oil resistant
hose each 2' long,4 hose clamps and 2 brass fitting s that fit the D&Daluminum master cylinder plugs.
Customer will need to figure out reservoir mount depending on location.

Brake Type

Design and layout Copyright 2012 by D&D Econo Disc Brakes